The Materials Science of Joining, Welding, Cladding

intermetallic phases and Kirkendall-porosity in Fe-Al joining
Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys
MSE-A_528 (2011) 4630 intermetallics-Kir[...]
PDF-Dokument [3.7 MB]
Microstructure of explosive joints: titanium to steel cladding
Hierarchical microstructure of explosive joints: Example of titanium to steel cladding
Mater. Sci. Eng.A 528 (2011)2641_explosi[...]
PDF-Dokument [1.6 MB]
Intermetallic phases during interdiffusion between Fe and Al
On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys
Acta Materialia 59 (2011) 1586 intermeta[...]
PDF-Dokument [3.3 MB]
Microstructure at Laser-Welded Aluminum-Steel Overlap Joints
Correlation Between Thermal Cycle and Formation of Intermetallic Phases at the Interface of Laser-Welded Aluminum-Steel Overlap Joints
AEM-2012-Laser-Welding-Al-to-Steel.pdf
PDF-Dokument [964.0 KB]
Role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys
The effect of Zn – both within Al and as a coating on steel – on the intermetallic phase formation and growth was systematically studied in controlled experiments, simulating the interfacial reactions taking place in dissimilar solid/solid and solid/liquid joining procedures.
Acta Materialia 96 (2015) 203 Zn effect [...]
PDF-Dokument [980.2 KB]

 

Acta Mat. 2011, 59, p. 364