Alloy design and rapid maturation of new steels

Atomic design fo a ductile 2 GPa Fe–Cr–C steel
Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2 GPa Fe–Cr–C steel
Acta-2012-Austenite-reversion-Fe-Cr-C.pd[...]
PDF-Dokument [2.9 MB]
Atom probe analysis at martensite austentite interface
Rapid prototyping of new triply weight reduced steels
New steel design: Rapid alloy prototyping (RAP) - Compositional and thermo-mechanical high throughput bulk combinatorial design of novel structural materials based on the example of 30Mn–1.2C–xAl
Acta-Mater-2012-RAP--30Mn-triplex-steels[...]
PDF-Dokument [1.3 MB]
rapid alloy design and maturation of Al-containing steels (YS: yield strength)
Superplastic martensitic steel
Superplastic martensitic Mn–Si–Cr–C steel with 900% elongation
Acta_Mater_2011_superplastic.pdf
PDF-Dokument [3.6 MB]
Ultra high strength maraging TRIP steel
ADV_ENGIN_MATER_2009_11_page_547_maragin[...]
PDF-Dokument [1.7 MB]
Nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography
Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography:
We studied a nanocrystalline AlCrCuFeNiZn high-entropy alloy synthesized b
Acta-Materialia-2013-atom-probe-high-ent[...]
PDF-Dokument [6.1 MB]
Middle Mn steel with maraging effect
Raabe_maraging_TRIP_scripta3d002eb12f012[...]
PDF-Dokument [342.1 KB]
Atom probe tomography on a Mn maraging steel
2011_Acta_Materialia_APT_Steel-Fe-Mn.pdf
PDF-Dokument [2.3 MB]
Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility
Design of a Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility through reduction of austenite stability
Acta Materialia 59 (2011) 4653–Mn-duplex[...]
PDF-Dokument [2.5 MB]
Fe to Al welding: reaction layer analysis (Acta Mater 2011)
On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys
Acta Materialia 59 (2011) 1586 intermeta[...]
PDF-Dokument [3.3 MB]
Annealing behavior of ferritic–martensitic 9%Cr–ODS–Eurofer steel
ODS-Eurofer-MSEA-2010.pdf
PDF-Dokument [2.7 MB]
Dislocation configurations in a weight reduced steel (Acta Materialia 60 (2012) 5791–5802).
Multistage strain hardening through dislocations and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel
Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced
Fe–Mn–Al–C steel
2012-Acta FeMnAlC.pdf
PDF-Dokument [1.8 MB]